Ԥ

Hello, welcome to the official website of Zibo Taylor Heat Exchange Equipment Co., Ltd.
popular searches:

Recommended Products

  • BR1.0 plate heat exchange equipment

    BR1.0 plate heat exchange equipment

  • BR0.5 plate heat exchange equipment

    BR0.5 plate heat exchange equipment

  • BR0.55 plate heat exchange equipment

    BR0.55 plate heat exchange equipment

  • BR0.3 plate heat exchange equipment

    BR0.3 plate heat exchange equipment

  • BR0.7 plate heat exchanger

    BR0.7 plate heat exchanger

  • BR0.37 plate heat exchange equipment

    BR0.37 plate heat exchange equipment

contact us

National Service Hotline:

0533-8053583

Zibo Taylor Heat Exchange Equipment Co., Ltd.


Telephone: 0533-8053583


Address: Boshan District, Zibo City, Shandong Province


Contact: Gao Qing


Mobile phone: 13409069825


Fax: 0533-8053583


E-mail: tlgaoqing@163.com




Technical Information
Your current location: Ԥ > Technical Information
  • [2018-11-10]

    Cleaning steps of plate heat exchanger

  • No matter what kind of mechanical equipment, scaling will inevitably occur after a period of use, which requires us to clean it, and plate heat exchangers are no exception. So do you know what are the cleaning steps for plate heat exchangers? It doesn't matter if you don't know, today I will introduce it to you, and take a look at the following article. (1) Put the two sides of the plate heat exchanger in and out of the pipe port ... [Details]
  • [2017-07-31]

    Design method of plate heat exchanger to optimize heat transfer efficiency

  • The plate heat exchanger is a kind of heat exchanger that is widely used and has a large heat exchange efficiency. Now that the living standards have improved, the industry of our plate heat exchangers has developed relatively well. The company specializes in this industry and is popular with consumers. Approval and attention, below we briefly understand the optimal use of heat transfer method of our plate heat exchanger: a. Improve the surface heat transfer coefficient of the plate ... [Details]
  • [2017-07-31]

    Method for preventing fouling of plate heat exchanger

  • The plate heat exchanger is the mechanical equipment used for heat exchange in the process of our current social life. Now that the living standards have improved, we are more familiar with the use of plate heat exchangers. Now the company specializes in this industry and is recognized by consumers and Concern, let's briefly understand the fouling prevention method of our plate heat exchanger: 1. Plate heat exchanger should not be used in ... [Details]
  • [2017-07-31]

    Component use engineering of plate heat exchanger

  • The plate heat exchanger is mainly the use of heat exchange equipment in the process of our mechanical heat exchange. Now the living standard has increased. We are stricter with the components of the plate heat exchanger. Our company specializes in this industry and has been well received by consumers. Approved and concerned, let's briefly understand the use of the components of our plate heat exchanger: 1. Fixed compression plate: not with fluid ... [Details]
  • [2017-07-31]

    Background and significance of the use of plate heat exchangers

  • The plate heat exchanger is mainly used in the heat exchange machinery used in the production and use of our industrial field. Now that the living standards have improved, we are more familiar with the use of plate heat exchangers. Now the company specializes in the industry and is receiving consumers' Approval and attention, let us briefly understand the meaning of use of our plate heat exchanger: The application of plate heat exchanger is very wide ... [Details]
  • [2017-07-31]

    Magnetic field antiscaling device is most suitable for antiscaling of heat exchangers

  • The use of magnetic field anti-scaling device is most suitable for the use of anti-scaling plate heat exchangers for heat exchangers, which brings convenience to many companies and makes friends' work more convenient. Let's find out what the magnetic field antiscaling of the lower plate heat exchanger looks like. At present, the most widely used electromagnetic scale preventer CALC-TECH series products in Europe are ... [Details]
  • [2017-07-31]

    Study on Numerical Simulation of Plate Heat Exchanger

  • Today, the content compiled by Xiaobian is the numerical simulation of plate heat exchangers. Friends who want to know will follow the introduction of Xiaobian to take a look. When gas-liquid two-phase flow flows in a plate heat exchanger, the flow variable is increased. Moreover, the relative velocity of the gas-liquid two-phase, the volume fraction of the gas phase, and other physical property parameters have great randomness, so the flow and heat transfer situation is very complicated. There are ... [Details]
  • [2017-07-31]

    Leaks in the heat exchanger should be done

  • Water leakage in the heat exchanger should be done so that the use of many equipment is not an accident during his life cycle, their daily work is tiring, and the user's inattentive care may cause him some conditions, and then Even if it is used for a longer time, some of his performance will be slightly reduced, just like the human body ... [Details]
  • [2017-07-31]

    How to use plate heat exchangers correctly

  • The plate heat exchanger believes that everyone is no stranger to it through the previous introduction. Today, I will introduce how to use the plate heat exchanger correctly. Friends who want to know will follow the introduction of the editor and take a look. 1. The plate type or corrugated type should be determined according to the actual needs of heat exchange occasions. For a large flow rate and a small allowable pressure drop, a plate with a small resistance should be selected ... [Details]
  • [2017-07-31]

    Working temperature of plate heat exchanger

  • No matter what kind of machinery and equipment, they have their working environment and some working temperature restrictions, and plate heat exchangers are no exception. Today I will introduce the working temperature of plate heat exchangers. Let's follow the introduction of Xiaobian and take a look at the following article. The general working temperature of plate heat exchanger is about -50-150, 18 ... [Details]
  • [2017-07-31]

    Solution for external leakage of plate heat exchanger

  • When we use a plate heat exchanger, sometimes we find some leakage. When we find a plate heat exchanger, we must first identify the cause and then find a solution. The plate heat exchanger manufacturer recommends that you follow these steps: In the no-pressure state, re-clamp the device according to the clamping size provided by the manufacturer. The size should be uniform and the deviation of the pressing size should not be greater than 0 ...... [Details]

Related Products

  • BR0.05 plate heat exchange equipment

    BR0.05 plate heat exchange equipment

  • BR0.10 plate heat exchange equipment

    BR0.10 plate heat exchange equipment

  • BR0.23 plate heat exchange equipment

    BR0.23 plate heat exchange equipment

  • BR0.3 plate heat exchange equipment

    BR0.3 plate heat exchange equipment

  • BR0.37 plate heat exchange equipment

    BR0.37 plate heat exchange equipment

  • MBR0.4 plate heat exchange equipment

    MBR0.4 plate heat exchange equipment

  • BR0.5 plate heat exchange equipment

    BR0.5 plate heat exchange equipment

  • BR0.55 plate heat exchange equipment

    BR0.55 plate heat exchange equipment

Zibo Taylor Heat Exchange Equipment Co., Ltd.
Contact: Gao Qing Phone: 0533-8053583
Address: Boshan District, Zibo City, Shandong Province Mobile: 13409069825
Email: tlgaoqing@163.com Postcode: 255000

online service

Online consultation

online service