Ԥ

Hello, welcome to the official website of Zibo Taylor Heat Exchange Equipment Co., Ltd.
popular searches:

Recommended Products

  • BR1.0 plate heat exchange equipment

    BR1.0 plate heat exchange equipment

  • BR0.5 plate heat exchange equipment

    BR0.5 plate heat exchange equipment

  • BR0.55 plate heat exchange equipment

    BR0.55 plate heat exchange equipment

  • BR0.3 plate heat exchange equipment

    BR0.3 plate heat exchange equipment

  • BR0.7 plate heat exchange equipment

    BR0.7 plate heat exchange equipment

  • BR0.37 plate heat exchange equipment

    BR0.37 plate heat exchange equipment

contact us

National Service Hotline:

0533-8053583

Zibo Taylor Heat Exchange Equipment Co., Ltd.


Telephone: 0533-8053583


Address: Boshan District, Zibo City, Shandong Province


Contact: Gao Qing


Mobile phone: 13409069825


Fax: 0533-8053583


E-mail: tlgaoqing@163.com




Technical Information
Your current location: Ԥ > Technical Information

Component use engineering of plate heat exchanger

2017-07-31 Source: Author: Anonymous read: 【Print this page】

The plate heat exchanger is mainly the use of heat exchange equipment in the process of our mechanical heat exchange. Now the living standard has increased. We are stricter with the components of the plate heat exchanger. Approval and attention, let us briefly understand the use of components of our plate heat exchanger:

1. Fixed compression plate: do not come into contact with the fluid. After tightening with the clamping bolt, press the gasket to ensure the seal.

2. Heat exchange gasket: It provides medium flow channel and heat exchange surface.

3. Sealing gasket: prevent fluid synthesis or leakage, and make it distributed among different plates.

4. Nozzles and flanges: provide inlet and outlet for fluids.

5. Upper and lower guide rods: bear the weight of the plate and ensure the installation size, so that the plate slides between them. The guide rod is usually longer than the heat exchange plate group in order to loosen the clamping bolts and slide the plates to check and clean.

6. Rolling device: enable the movable pressure plate or intermediate partition to slide on the upper and lower guide rods for assembly, disassembly, inspection and maintenance.

7. Movable compression plate: used in combination with the fixed compression plate, and can be slid on the guide bar for assembly, disassembly, inspection and maintenance.

As mentioned above, we simply learned about the components of our plate heat exchanger. Our company specializes in the production and use of this product. It is safe during production and use. Our products are of good quality and are highly loved by customers. Customers are very satisfied with their use. , Welcome to inquire!


Zibo Taylor Heat Exchange Equipment Co., Ltd.
Contact: Gao Qing Phone: 0533-8053583
Address: Boshan District, Zibo City, Shandong Province Mobile: 13409069825
Email: tlgaoqing@163.com Postcode: 255000

online service

Online consultation

online service