Ԥ

Hello, welcome to the official website of Zibo Taylor Heat Exchange Equipment Co., Ltd.
popular searches:

Recommended Products

  • BR0.55 plate heat exchange equipment

    BR0.55 plate heat exchange equipment

  • BR0.3 plate heat exchange equipment

    BR0.3 plate heat exchange equipment

  • BR1.0 plate heat exchange equipment

    BR1.0 plate heat exchange equipment

  • BR0.7 plate heat exchanger

    BR0.7 plate heat exchanger

  • BR0.5 plate heat exchange equipment

    BR0.5 plate heat exchange equipment

  • BR0.37 plate heat exchange equipment

    BR0.37 plate heat exchange equipment

contact us

National Service Hotline:

0533-8053583

Zibo Taylor Heat Exchange Equipment Co., Ltd.


Telephone: 0533-8053583


Address: Boshan District, Zibo City, Shandong Province


Contact: Gao Qing


Mobile phone: 13409069825


Fax: 0533-8053583


E-mail: tlgaoqing@163.com




company Ԥ
Your current location: Ԥ > News > Company News

How to deal with plate heat exchangers if leakage occurs

2019-08-16 Source: Author: Anonymous read: 【Print this page】

Adhering to the concept of concentration, the company regards "being first, doing things later, quality first, integrity-based, dedicated service, and brand building" as the code of conduct for all employees. Combining the quality of concentration and dedication, has established a good reputation in the industry. How to deal with the leakage of the plate heat exchanger , let's look at it with Xiaobian now.
Leaks occurred in the plate heat exchanger.
Because the plate heat exchanger has a longer sealing perimeter and a thinner plate, it may show the appearance of leakage during use. The appearance of leakage can be divided into two types: internal leakage and external leakage.
A. Check whether the inlet parameters of the hot and cold media are consistent with the original planned values. If they do not match, try to adjust to the original value. If the import parameters have been changed and cannot be adjusted to the original planned values, the planning and accounting should be carried out from the beginning to decide to increase or decrease the heat exchange area or change the process combination.
B. If the import parameters of the cold and hot media are consistent with the original planned values, and the export parameters do not reach the planned values, then the machine should be stopped, disassembled to check whether there is blockage between the plates or plate fouling, and dispose of them in a timely manner.
a. Disassemble the plate heat exchanger, remove the dirt on the surface of the plate, dry it, and assemble the heat exchanger from the beginning. A hydraulic test with a pressure of 0.2 to 0.3 MPa was performed on one side. After the sliding contact line waits for the water to flow out from the other side, the experiment is suspended. Open the heat exchanger and carefully observe the untested side of the pure water machine plate. The wet plate in the meantime is the plate with holes or cracks.
b. It is also possible to use light-transmitting and coloring inspection methods on the scene to find out the waste plates.
的信息,也希望给您带来了帮助,如果有疑问及需要请联系我们,为您奉上性能稳定、可靠、节能的产品。 The above is the information about the plate heat exchanger explained for you, and I hope to help you. If you have any questions and needs, please contact us to provide you with stable, reliable and energy-saving products.
Zibo Taylor Heat Exchange Equipment Co., Ltd.
Contact: Gao Qing Phone: 0533-8053583
Address: Boshan District, Zibo City, Shandong Province Mobile: 13409069825
Email: tlgaoqing@163.com Postcode: 255000

online service

Online consultation

online service