Ԥ

Hello, welcome to the official website of Zibo Taylor Heat Exchange Equipment Co., Ltd.
popular searches:

Recommended Products

  • BR1.0 plate heat exchange equipment

    BR1.0 plate heat exchange equipment

  • BR0.5 plate heat exchange equipment

    BR0.5 plate heat exchange equipment

  • BR0.55 plate heat exchange equipment

    BR0.55 plate heat exchange equipment

  • BR0.3 plate heat exchange equipment

    BR0.3 plate heat exchange equipment

  • BR0.7 plate heat exchange equipment

    BR0.7 plate heat exchange equipment

  • BR0.37 plate heat exchange equipment

    BR0.37 plate heat exchange equipment

contact us

National Service Hotline:

0533-8053583

Zibo Taylor Heat Exchange Equipment Co., Ltd.


Telephone: 0533-8053583


Address: Boshan District, Zibo City, Shandong Province


Contact: Gao Qing


Mobile phone: 13409069825


Fax: 0533-8053583


E-mail: tlgaoqing@163.com




company Ԥ
Your current location: Ԥ > News > Company News

Factors to Know When Selecting a Plate Heat Exchanger

2019-10-15 Source: Author: Anonymous read: 【Print this page】

We have mature service skills and strict service standards, and have a standardized and rigorous operation team to provide you with convenient and reliable services and products. Factors to know when selecting a plate heat exchanger , now look at it with Xiaobian.
First, the choice of plate type of plate heat exchanger.
The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion. For a large flow rate and a small allowable pressure drop, a plate with a small resistance should be selected, and a plate with a large resistance should be used. Depending on the pressure and temperature of the fluid, determine whether to choose a detachable or brazed type. When determining the plate type, it is not appropriate to choose a plate with a small plate area, so as to avoid too many plates, the flow velocity between the plates is too small, and the heat transfer coefficient is too low. This problem should be paid more attention to for larger heat exchangers.
Second, the choice of processes and runners.
A process refers to a group of parallel flow channels in a plate heat exchanger in the same direction, and a flow channel refers to a medium flow channel composed of two adjacent plates in the plate heat exchanger. In general, several flow channels are connected in parallel or in series to form different combinations of cold and hot medium channels.
Third, the pressure drop check.
The design and selection of plate heat exchangers generally have certain requirements on pressure drop, so they should be checked. If the check pressure drop exceeds the allowable pressure drop, the design selection calculation needs to be performed again until the process requirements are met.
The above is the information about the plate heat exchanger explained for you, and I hope to help you. If you have any questions and needs, please contact us to provide you with stable, reliable and energy-saving products.
Zibo Taylor Heat Exchange Equipment Co., Ltd.
Contact: Gao Qing Phone: 0533-8053583
Address: Boshan District, Zibo City, Shandong Province Mobile: 13409069825
Email: tlgaoqing@163.com Postcode: 255000

online service

Online consultation

online service