We uphold the spirit of solid pursuit and dedication to the enterprise, provide customers with new and popular products, always treat people with sincerity as the concept of corporate development, and achieve mutual benefit with customers. The overall technical skills of plate heat exchangers will
now be reviewed with Xiaobian.
1. Overall technical requirements:
The plate heat exchanger is a detachable heat exchanger and adopts the same side flow form. In determining the heat exchange area during selection, various unfavorable factors such as the differences between operating and design conditions should be fully considered. The heating conditions should be selected according to the heat transfer coefficient not exceeding 5500W / m2K.
The plate material is AISI316 and the thickness is 0.5mm.
The gasket is made of EPDM, snap-on, free of sticking;
Common design pressure is 1.6MPa, gasket temperature resistance is 150 ℃;
Plate heat exchanger design pressure drop, primary side ≤50kPa, secondary side ≤50kPa;
In the strength test, unilateral pressing is performed according to 1.3 times the working pressure.
When the hot water side pressure is 1.6 MPa and the cold water side pressure is normal pressure; similarly, when the cold water side pressure is 1.6 MPa and the hot water side pressure is normal pressure.
The above is the information about the plate heat exchanger
explained for you, and I hope to help you. If you have any questions and needs, please contact us to create value for customers and promote social progress.