Ԥ

Hello, welcome to the official website of Zibo Taylor Heat Exchange Equipment Co., Ltd.
popular searches:

Recommended Products

  • BR0.7 plate heat exchanger

    BR0.7 plate heat exchanger

  • BR1.0 plate heat exchange equipment

    BR1.0 plate heat exchange equipment

  • BR0.3 plate heat exchange equipment

    BR0.3 plate heat exchange equipment

  • BR0.37 plate heat exchange equipment

    BR0.37 plate heat exchange equipment

  • BR0.5 plate heat exchange equipment

    BR0.5 plate heat exchange equipment

  • BR0.55 plate heat exchange equipment

    BR0.55 plate heat exchange equipment

contact us

National Service Hotline:

0533-8053583

Zibo Taylor Heat Exchange Equipment Co., Ltd.


Telephone: 0533-8053583


Address: Boshan District, Zibo City, Shandong Province


Contact: Gao Qing


Mobile phone: 13409069825


Fax: 0533-8053583


E-mail: tlgaoqing@163.com




Industry Ԥ
Your current location: Ԥ > News > Industry News

Plate type selection of plate heat exchanger

2019-05-14 Source: Author: Anonymous read: 【Print this page】

The company has a strict quality control system, from production process management to factory inspection and control to ensure product performance and quality. The choice of the plate type of the plate heat exchanger will now be reviewed with Xiaobian.
1. Plate type selection.
The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion. For a large flow rate and a small allowable pressure drop, a plate with a small resistance should be selected, and a plate with a large resistance should be used. Depending on the fluid pressure and temperature, determine whether to choose a detachable or brazed type. When determining the plate type, it is not appropriate to choose a plate with a too small area, so as to avoid too many plates, the flow velocity between the plates is too small, and the heat transfer coefficient is too low. This problem should be paid more attention to for larger heat exchangers.
2, the choice of processes and runners.
A flow refers to a group of parallel flow channels in the same direction of a medium in a plate heat exchanger, and a flow channel refers to a medium flow channel composed of two adjacent plates in a plate heat exchanger. In general, several flow channels are connected in parallel or in series to form different combinations of cold and hot medium channels.
The process combination form should be calculated based on heat exchange and fluid resistance, and determined under the requirements of process conditions. Try to make the convective heat transfer coefficients in the cold and hot water flow channels equal or close, so as to have a heat transfer effect. Because the convective heat transfer coefficients on both sides of the heat transfer surface are equal or close, the heat transfer coefficient gets a larger value.
The above is the information about the plate heat exchanger explained for you, and I hope to help you. If you have any questions and needs, please contact us. We are committed to the entrepreneurial spirit of integrity, pragmatism and innovation. We look forward to working with you for a win-win situation. future.

Zibo Taylor Heat Exchange Equipment Co., Ltd.
Contact: Gao Qing Phone: 0533-8053583
Address: Boshan District, Zibo City, Shandong Province Mobile: 13409069825
Email: tlgaoqing@163.com Postcode: 255000

online service

Online consultation

online service